The following guide is intended as an overview of your Aurender's hardware interface.

Detailed installation information is found in the included Quick Start Guide and a comprehensive Conductor App Overview and How-To guides are found in the Aurender Knowledge Base.

⎪Table of Contents⎪

1. Safety & Precautions

2. Product Warranty

3. Installation

   3.1 Equipment and Included Accessories

   3.2 Positioning AP20

   3.3 Connection

4. Anatomy of AP20

   4.1 Front Panel

   4.2 Rear Panel

5. Technical Specifications

1. Safety & Precautions

AP20 is a specialty component that is designed to interface with a variety of home audio equipment. Before purchasing and installing, please review the specifications and manuals of other equipment in your system that will interface with AP20.

Please do not hesitate to contact [email protected] for assistance as needed.

1. Be careful not to damage the device due to improper handling or dropping.
2. (Please note: The rubidium module is especially sensitive to physical shock.)
3. Do not disassemble the device.
4. Avoid exposure to oil, dust, water, high humidity or smoke.
5. Ensure that there is at least 5cm(2") of space on each side for proper ventilation.
6. Cleaning: Use a soft non-abrasive cloth to gently wipe the outside of the device. Water or other cleaning solutions should be avoided.
7. Should the product require hardware repair, work must be performed only by qualified technicians of Aurender headquarters or distributors/dealers. Failure to observe this precaution will void the warranty.
8. Shut down or unplug the power cable when not in use for an extended period or when there is severe lightning.
9. Be sure to shut the unit down when connecting or disconnecting cables.