The following guide is intended as an overview of your Aurender's hardware interface. Detailed installation information is found in the included Quick Start Guide and a comprehensive Conductor App Overview and How-To guides are found in the Aurender Knowledge Base.

Box Contents

• Aurender A200

• Handheld remote control

• AC Power Cord

• Quick Start Guide

Not included: An iOS (iPad or iPhone) or Android device is required to interface with and control your Aurender. The Aurender must be connected to a Local Area Network (LAN) via Ethernet (CAT5 or higher) in order to facilitate communication between your remote device and the Aurender. Please review the "Connect to Local Area Network (LAN)" section of the included Quick Start Guide for more information on network connectivity.

Front Panel

A200 front annotated.png

1. On/Off

With the AC switch on the rear in the ON position, simply press and release the front panel On/Off button to turn the Aurender on or off. The surrounding LED light will pulse while the unit is starting up or shutting down, and it will stop pulsing when fully turned on or off. Pressing and holding the On/Off button will trigger a forced shut down and this should be avoided. More information on proper shut down procedure is found here: What is the proper way to shut down my Aurender?

2. Wide Front LCD Display

Front panel display preferences can be adjusted in the Conductor app in the "Front Display" section of the Settings menu. The display will automatically go dim after no playback or other activity has occurred for a period of 3 minutes.

3. Volume Knob

Manually adjust the DAC-level volume control. A30 Volume control can be configured or disabled in the Advanced 2 section of the Settings Menu in the Conductor app.

4. Input Selection

Press and release the button to toggle inputs: A200 INTERNAL PLAYER, COAXIAL, OPTICAL.

5. IR Receiver eye

IR signal from the included remote control are received by the IR receiver eye.